Window glass has the correct treatment of water vapor!
Time: 2023-11-23
Views: 8873

Many owners have feedback on why the doors and Windows of their homes have been used for five years, which not only affects daily use, but also affects the appearance of beauty, so why the middle layer of door and window glass will appear water vapor? In view of this problem, I hope it will be helpful to everyone.



Causes of water vapor in double glazing


First of all, we need to understand the structure of double glass, which is composed of two or more pieces of glass between aluminum bars, aluminum bars are used inside the molecular sieve, and the outer edge is sealed with sealant. If the seal is not well done or the molecular sieve is missing when the production is done, it is extremely easy to cause the phenomenon of water vapor, because the water vapor is in the middle layer, so the rub can not be rubbed off. After waiting for the temperature to rise, the water vapor will automatically disappear, and the water vapor will automatically generate when the cold day comes, so it is indeed more troublesome.



Method for treating water vapor in double-layer glass


After the double glass is clear what causes fog, if it is caused by the glass cracking water, it is best to find professional construction personnel to replace it. If the installation process of double glass is poor, resulting in the sealing strip cracking and causing water vapor to enter the double glass window, then you may wish to add gaskets on the double glass. In fact, the original septal strip is removed, and then replaced with a new one, these refined things are still recommended to deal with relevant experienced personnel.



If the water vapor phenomenon caused by the temperature difference, it is recommended to open the window ventilation, so that the temperature difference is not too large, until the water vapor of the glass is dispersed and then close the window. If the installation time is not long, you can ask a professional teacher to disassemble the glass, and then clean it with an appropriate amount of diluted hydrofluoric acid, and then do the hollow treatment again. 

back to list