Door and window installation is not a simple small thing, because it is well installed not only makes the follow-up problems less trouble but also makes the overall appearance level rise straight. Although the installation of doors and Windows does not require our owners to do it themselves, we owners should know what the process of door and window installation is so that we can know to reduce the risk of being fooled. Today, Xiaobian will talk about the whole process of door and window installation in detail, hoping to help you!

Plan positioning lines for doors and Windows

According to the size and elevation of the installation position of the doors and Windows in the design drawings, at the same time, according to the middle line of the doors and Windows to both sides of the measured door and window line, if it is a multi-storey or high-rise building should be used for the top door and window line, with the line drop or theodolite will be the door and window line down, and in each layer of door and window marking, the individual not straight edge should be picked out. At the same time, the position of the door and window water bottle should be measured from the horizontal line of +1250px upward and backward to the lower skin elevation of the window, so as to ensure consistency.

Windows and doors are installed with water

In fact, according to the requirements of the construction drawing, the water is fixed on the doors and Windows, and the position is correct and the installation is firm according to the length, width and height. This solution can be said to be very simple and practical.

Antiseptic treatment

When the anti-corrosion treatment of the surface around the door and window frame is required on the drawing, it should be in accordance with the drawing. If the design does not require it, it can be painted with anti-corrosion paint or paste plastic film for protection, which can avoid the direct contact between the surface of the door and window and water and sand, thereby corroding the door and window. When installing doors and Windows at the same time, if connecting iron parts are used to fix them, stainless steel parts are best used to connect iron parts, fixing parts and other metal parts for installation. Otherwise, anti-corrosion treatment must be carried out to avoid electrochemical reaction and corrosion of aluminum alloy doors and Windows.

Aluminum alloy doors and Windows are installed in place

Install aluminum alloy door and window frames according to the demarcated door and window positioning lines. And timely adjust the horizontal, vertical and diagonal length of the door and window frame to meet the quality standard, and then use a wooden wedge to temporarily fix. Therefore, the correct installation of doors and Windows can make the doors and Windows longer service life,